Industrial Endoscope Detection Range

1. Inspection of weld surface defects. Check the welding quality such as weld surface cracks, incomplete penetration and weld leakage.
2. Inner chamber inspection. Check for defects such as surface cracks, peeling, pulling lines, scratches, pits, bumps, spots, and corrosion.
3. Status check. When some products (such as turbo pumps, engines, etc.) are working, the endoscopic inspection shall be carried out according to the items specified in the technical requirements.
4. Assembly inspection. When there is a requirement and need, use an industrial video endoscope to check the assembly quality; after the assembly or a certain process is completed, check whether the assembly position of each component meets the requirements of the drawing or technical conditions; whether there are assembly defects.
5. Excess material inspection. Check the remaining debris in the product cavity, foreign matter and other excess.