Overall Requirements For Industrial Endoscopes

1. Understand the internal structural characteristics of the test workpiece, the specific content and location of the test, and expand the related linked instruments according to the procedure to check whether the power supply and grounding are reliable, and the position of the instrument is safe and stable.
2. Select the appropriate probe, lens and access to the product. Before testing, you should be clear about obstacles, burrs and other objects in the channel that may hinder or damage the probe.
3. For some products that cannot be understood internally or have complex structures, you can use the observation lens to observe and then inspect, and try to make the lens face the inspection area as much as possible during the inspection.
4. Before the test, the eyes should be adapted to the test environment and light. When working for a long time, attention should be paid to avoid eye fatigue and artificial missed tests.
5. Care should be taken during the detection process to ensure that the probe reaches the designated position smoothly. If the probe encounters obvious resistance during the advancement process, it should stop advancing immediately, and the probe should be withdrawn slowly. If it is stuck, do not pull it hard, so as not to damage the workpiece or probe.
6. Process and analyze the collected images.
7. Clean the probe according to the regulations, organize the instrument and the scene.
8. It is recommended that the staff can use auxiliary tooling to help the probe reach the best position smoothly.
9. The use of industrial endoscope equipment includes the type, diameter, and model of industrial endoscopes and probes, as well as the position and accuracy of industrial endoscope measurements.
10. Test report requirements.