As a precision instrument for detecting the internal conditions of industrial equipment, industrial endoscopes play an important role in various industrial sectors. What issues should be paid attention to when using industrial endoscopes to ensure the effectiveness of product use?
Before use
| The operator should carefully check the operating manual of the endoscope to understand its performance, functions and operating procedures. Check whether the appearance of the endoscope is damaged. If there is a problem, it is strictly prohibited to use and repair or replace it in time. If the lens is dirty, use a soft cloth dipped in alcohol to wipe the lens. Check whether the power supply, light source, etc. of the equipment are working properly, and all connection parts are stable and not loose. |
|
During operation, special attention should be paid to electrical safety to ensure that the corresponding voltage is used to prevent overload from burning endoscope components. If a rechargeable battery is used, check the battery status regularly to avoid overcharging and overdischarging. Charging should be carried out under specified environmental conditions.
When using
When inserting the endoscope into the equipment, the action should be gentle and slow to prevent damage to the inside of the equipment being tested, especially when detecting some precision or fragile parts. Pay close attention to the insertion depth and angle of the endoscope, and avoid excessive bending or twisting of the cable to avoid scratching the endoscope lens and damaging the internal circuit, causing the endoscope to fail to work properly.
When testing the inside of high-temperature equipment, you need to wait for the equipment to cool to a safe temperature range, otherwise the high temperature may damage the endoscope lens and sensor, and there is also a risk of scalding the operator.
During the inspection process, if any abnormal situation is found, such as smoke, odor or abnormal sound inside the equipment, the operation should be stopped immediately, the endoscope should be slowly withdrawn, and the cause should be checked. It is strictly forbidden to continue forced inspection under abnormal conditions to avoid causing more serious accidents.
After use
Clean the endoscope lens, cable and other parts in time to remove impurities such as oil and dust on the surface. Store the endoscope properly to avoid squeezing, collision or exposure to harsh environments. Regularly maintain the equipment, check the wear of each component, calibrate and debug according to the prescribed cycle to ensure that its performance is always in good condition.
Industrial endoscopes are small in size, so operators need to use them slowly to avoid pulling and damaging the equipment and endoscopes. This can better play the role of non-destructive testing of endoscopes and extend their service life.
| As a provider and manufacturer specializing in endoscope modules and solutions, EZON has cooperated with many endoscope finished product manufacturers and has won unanimous praise from manufacturers with its professional technology and production processes. |
|
