As a non-destructive testing equipment, industrial endoscope is also a precision instrument, so it is inevitable that there will be problems of one kind or another during use. The following editor has sorted out some common industrial endoscope failure problems and treatment measures, hoping to be able to Help friends who have purchased and used industrial videoscopes.
1. There is no display or the display is not clear on the display screen: it may be that the display is faulty or the connection line is loose.
Solution: Confirm whether the cable is connected correctly or replace the monitor.
2. The light source is not bright or the brightness is insufficient: it may be a light source failure or a power supply problem.
Solution: Check whether the power supply is connected stably, and replace with a new light source.
3. The image is not clear or cannot be imaged: it may be that the lens is seriously dirty or the lens is out of adjustment.
Solution: clean the lens or adjust the lens.
4. The mechanical part cannot operate normally: it may be that the connection of the mechanical part is loose or faulty.
Solution: Confirm whether the connection is loose, and try the operation again; if the mechanical part fails seriously, it needs to be repaired or replaced.
5. The lens is damaged: it may be damaged during use or excessive wear and tear caused by long-term use.
Solution: Replace with a new lens.
6. Other faults: There may be other types of faults, such as line faults, image color distortion, low resolution, etc. Solution: Troubleshoot or replace the corresponding device according to the specific situation.
As a professional manufacturer of endoscope products, EZON not only has mature technical solutions and rigorous manufacturing processes, but also provides customers with various guarantees before, during and after sales with a systematic customer service system, allowing you Buy with peace of mind and use with confidence. Just leave all kinds of problems about the product to us. Look forward to working wit
